Part of the heelpiece snapped off with half of the plate on it and the other half is still attached to the rest of the heelpiece on the ski (just look at the photos). I landed on the airbag after a corked 900 with my DINs on 10 and the metal plate that gives the binding its adjustability snapped clean in half. I was in Les Deux Alpes a few weeks ago and they have a kicker set up in town with an airbag landing for practising jumps on. So, does anyone have any contacts I could try?Īnd now Salomon bindings (original S900 Ti 1080 - 99/00 I think). They said Salomon Europe is seperate from Salomon USA though, so I might be able to deal with them directly myself. They phoned me back a few days later saying that Salomon Europe don't sell the the standard part in my size either, even though they sell boots containing the part. So I asked them to order me in some standard ones. I took them to a shop mid-season to try to order the shock absorbing boards that are in the 1080/Promodel but was told that since they don't make those boots up to my size, I couldn't get those to fit (mine are 30.5 the biggest they make is the 29.5 Pro Model). Making your ski boot adjustments at home may end up being a waste of time once you arrive at the mountain and have to start over again on a colder, stiffer boot.I've been riding the original Salomon X-Wave 9.0 for the past few years (must be 00/01 model I think), but this year the part that sits on the shell and that the liner sits ontop of (I think it's called the boot board or foot board) broke on each just in front of the heel, probably from too many hard landings in the park. ![]() ![]() It is best to make your adjustments at or near the mountain because the boot will adjust a certain way in warm temperatures and a different way in the cold mountain air. It shouldn't cut off blood circulation, but your foot shouldn't be able to move around either. Once you have adjusted your boots to properly fit your legs and the way you ski, you need to make sure the fit is not too tight. You want the forward lean angle of the boot to match your leg angle when in a skiing stance. Always remember to set the dial back to ski when you hit the slopes again. The dial along the back of the upper cuff of the boot labeled "Walk/Ski" loosens the boots so you can walk more easily when taking breaks from the mountain. Set the "Walk/Ski" dial to ski when you are locked onto your skis. If the boot feels a little too narrow then you should loosen the 3D buckle by rotating it counterclockwise. ![]() If your foot moves from side to side in the closed boot then you should tighten the 3D buckle by rotating it clockwise. One of the buckles on Salomon Evolution ski boots is called a 3D buckle, but this is only an industry term that means the second buckle from the bottom can make the instep of the boot wider or more narrow. Once you have made the previous adjustments to your boots you will find it necessary to adjust all of the buckles in order to allow the most secure fit.Īdjust the 3D buckle to narrow or widen the instep. Each individual buckle is threaded allowing the skier to loosen or tighten them by turning them counterclockwise or clockwise respectively. Each buckle on the boot is possible to adjust by simply rotating the buckle when it is undone. It is best to stand in your boots in the skiing stance you use most often while you adjust the forward lean until it reaches a comfortable angle.Īdjust the tightness of the boot's buckles. You will usually want the forward cant of the boot at a middle angle unless you are a racer and then you want it all the way forward. The end of the Allen wrench inserts into the forward lean adjustment or canting bolt and you turn the wrench either way to adjust the cant of the shin of the boot forward or upright. ![]() Also, adjust the flex softer for powder and stiffer for hard packed snow.Īdjust the forward lean of the ski boot with the Allen wrench at the side of the boot at ankle height. You want a stiff flex on warm days because your boot will be soft and a soft flex on cold days when your boot will already be stiff from the weather. This adjustment is a simple dial or slide lever that softens the flex in one direction and stiffens the flex in the other direction according to the labels around the flex adjustment. The flex adjustment is on the side of the boot right where the outside of your ankle would be. Change the flex adjustment according to the weather on the mountain.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |